Godox AD200

$299.99

-

Only 2 left in stock

This extends the basic warranty that covers manufacturer defects. Drops, Spills, Wear and Tear are not covered.
Warranty coverage for any reason. Covers repair or up to replacement of the item.
Product total
Options total
Grand total

Description

Godox AD200

 

The Godox AD200 is built around a unique flash light source that has a standard speedlight head and a bare bulb head that give you the option of 2 distinctly different qualities of light. The kit comes with the 2 heads, lithium battery, charger and carry case.

The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200 has impressive core features such as 200 watt seconds of power that is adjustable in 8 stops from 1/128 to 1/1, recycling from 0.01 to 2.1 seconds and flash durations as short as 1/11,300 sec. The flash runs on a removal rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.

The AD200 has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user’s choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head’s built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, Panasonic and Fuji cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-speed sync up to 1/8000 sec, power level, modeling lamp and ready beeper at distances up to 328′. Firmware updates are obtainable on the Godox website.

Built-In 2.4 GHz Wireless X System

Built-in wireless receiver: control triggering power level, alert beep with optional wireless transmitter. Compatible with Nikon, Canon, Sony, Olympus, Panasonic and Fuji TTL.

Bare Bulb and Speedlight Flash Heads

Bare bulb and speedlite flash heads are included to vary your quality of light. Color temperature is a steady 5600K over the entire power range.

Large Capacity Lithium Battery Pack

The 14.4 V / 2900 mAH battery pack gets 500 full power flashes with 0.01 to 2.1 sec. recycling.

AV Panel

Easily readable digital panel displays your adjustments

Accessories

Barn Doors, color filters and diffusers are available to personalize your work.

Numerous Control Functions

  • 8-step power range: 1/1 to 1/128
  • Supports flash exposure compensation
  • 1/8000 sec high-speed Sync
  • First and second curtain sync
  • Modeling lamp
  • Manual flash
  • Multi flash
  • Custom functions

Godox AD200 Specs

Maximum Watt/Seconds 200
Compatibility TTL with Canon, Nikon, Sony cameras with optional X1-C, X1-N, and X1-S transmitters
TTL with Olympus/Panasonic, Fuji cameras with optional X1T-O and X1T-F transmitters
Control Manually on unit
Via X1 Transmitter Which Will Wirelessly Control:
Flash Mode: TTL, Manual, Multi (Stroboscopic), power level
Modeling lamp on/off, Beeper on/off
First and second curtain sync, High Speed Sync
Guide Number At Full Power:
Speedlite Flash Head: 170.6′ (52 m) ISO 100 @ 35 mm
Bare Bulb Flash Head: 197′ (60 m) ISO 100 with AD-S2 reflector @ 28 mm
Color Temperature 5600K (+/-200K)
Recycle Time 0.01 to 2.1 sec
Flash Duration Speedlite Flash Head at t0.1: 1/220 to 1/13,000 sec
Bare Bulb Flash Head at t0.1: 1/220 to 1/11,300 sec
Flash Variability 8 Steps: 1/128 to 1/1
Flash Delay Yes, 0.01 to 30 sec
Flash Modes TTL, Manual, Multi (Stroboscopic)
Stroboscopic: up to 90 times (99 Hz)
Modeling Light Uses Speedlite Head: Auto turn off after 30 minutes
Sync Mode High-speed sync up to 1/8000 sec
First curtain sync and second curtain sync
Flash Exposure Compensation Yes, plus or minus 3 stops in 1/3 stop increments
Flash Ready Indicator LED, beep
Flash hibernates automatically after 30 minutes of non-use
Built-in Slave Cell S1 and S2 optical slave modes
2.4 GHz radio system
Wireless & Radio Specifications Function: Slave or Off
Channels: 32
Groups: 5 (A, B, C, D, E)
Range: 328′ (100 m)
Mounting 1/4″-20 female threads
AD-E Holder (stand mount)
Fan Cooled No
Replaceable Flashtube Yes, in bare bulb head
Connectors 3.5 mm sync input
Wireless control port
USB port
Battery Lithium, 14.4 V / 2900 mAH
Power remaining indicator
Number of Flashes @ Full Power 500
Dimensions 6.6 x 3.0 x 2.0″ (168 x 75 x 50 mm) without flash head
Weight 19.7 oz (560 g) without flash head and battery

Additional information

Weight 5.1 lbs
Dimensions 10 × 8 × 6 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.